Things Needed
The staghorn sern is an epiphytic plant , which imply it gets most of it nutrient from the breeze . It adhere to trees and other surface using brown basal frond . Because of its strange growth habit , it can be mounted in a wire basket or put on on panel that are bind to trees or structures . Another way to mount a staghorn fern is to attach it to a circuit card and hang up it from a tree diagram using a chain . You ’ll need a chain because of its eventual fledged weight . This is a common method acting in climates with freezing temperatures in the winter , as it makes it easy to move the fern to a protect spot .
Step 1
set a 12 - inch piece of untreated 2 - by-4 wood monotonic on a table or workspace . The wood must be untreated because treated wood often curb copper , which toss off staghorn ferns . Use a pencil to mark the Grant Wood where the base of the fern will cover . Nail six 2 - inch nails into the wood , 1 inch from each side of where the fern will be mount , leaving about 1/2 inch of nail exposed to wrap the fishing air around . The fern will be mount on the top side of the 2 - by-4 small-arm of Grant Wood when it is hung .
Step 2
Drill two holes into the slice of 2 - by-4 in woodwind , 3 inches from each terminal , toward the midriff of the wood . Drill the holes large enough for each hole to hold one crank eye thunderbolt . Insert a nut eye bolt in each hole and place a washing machine over the train of thought protruding from the bottom of the wood . Tighten the nuts over the bolts to secure the washers and nut eye bolts .
Step 3
intoxicate a few handfuls of sphagnum moss in a pail of water until it is saturated . The amount of moss should be enough to sate the cup - mold backside of the staghorn fern as it is mounted on the wood .
Step 4
Place the concentrated sphagnum moss on the wood in the centre of the nail and mount the staghorn fern over the moss by wrap up the fishing line around each nail and interbreed over the home of the fern . Wrap firmly , but not so tightly it abridge into the fern ’s root word . connect off the fishing line when the fern is unwaveringly mount on the board and curve off excess line with a pair of scissors . After a few month , the fern will grow over the line and will eventually cover the entire objet d’art of wood .
Step 5
Take each end of the chain and seize to the eye bolt with the appropriate sized string bond . pay heed the fern in the desired location , which should be a ardent , shady expanse where you could irrigate it if it gets dry . If you call for to move the fern to another location , simply remove one chain of mountains shackle and the chain will break innocent of the mount .
References
Related
